The CTL-SEN-R7/3100 is a high-precision dual-tech presence sensor designed for smart buildings and space automation. Combining 24GHz FMCW radar with PIR technology, its cross-validation and self-learning algorithms detect subtle micro-motions (like breathing) while eliminating false alarms from airflows and temperature drift. With direct AC 100–240V power, an onboard relay output, and a 0–32,000 Lux daylight sensor, it provides an all-in-one sensing and control solution.
| Output Type | Mains Output |
| Input Voltage | AC 100 to 240 V |
| Power Consumption | 0.5 W (Max) |
| Relay Output | Normally Open Mode, Normally Closed Mode |
| Relay Load | AC 100 to 240 V, ≤ 2 A |
| Indicator Light | LED |
| Detection Mode | 24GHz FMCW Radar + PIR |
| Operating Frequency | 24.00 to 24.25 GHz |
| Transmit Power | ≤ 10 dBm |
| Installation Method | Recessed Ceiling Mount |
| Mounting Height | 2.0 to 3.2 m |
| Detection Angle | 360° |
| Detection Coverage | Installation at 3.0 m Height: ① Motion & Micro-motion: Detection diameter at least 8.0m ② Stationary Presence: Detection diameter at least 6.0m |
| Detection Range | 1.5 to 8.0 m (sensor to target) |
| Sensitivity | Highest, High, Medium, Low, Lowest |
| Illuminance Monitoring | 0 to 32,000 Lux (Accuracy ±4%) |
| Delay Time | 5 to 3,600 seconds |
| Product Size | Φ60 mm × 65 mm |
| Cutout Size | Φ50 mm |
| Product Weight | 65 g |
| Operating Temperature | Indoor -20 to 45°C |
| Operating Humidity | < 95% RH (Non-condensing) |
| Storage Temperature | -40 to 85°C |
| Protection Level | IP20 |
| Housing Material | PC |
Featuring advanced spatial coverage at a standard mounting height of 3.0 meters, this dual-tech presence sensor offers a micro-motion/stationary detection coverage diameter of approximately 6.0 meters and a major-motion detection coverage diameter of up to 8.0 meters.
The flush-mounted sensor has an outer diameter of 60 mm, a depth of 65 mm, and fits standard Φ50 mm ceiling cutouts.
Interference Mitigation: Keep away from moving objects (curtains, fans, plants), reflective metal/glass surfaces, HVAC air vents, and EMI sources. Adjust detection range to prevent false triggers through thin partitions.
Device Spacing: Maintain at least 4 meters between sensors; avoid pointing radar faces directly at each other to prevent co-channel interference.
Mounting & Handling: Mount on a solid, vibration-free surface and avoid flimsy, vibrating panels. Handle with care without pressing on the Fresnel lens or internal antenna.
Electrical Safety: Powered by AC 100–240V. Turn off mains power before wiring; must be installed by a qualified electrician. Use flame-retardant wiring without exposed cores, and ensure upstream circuits include leakage and overload protection.
Packaging Disposal: Recycle packaging per local environmental regulations. Keep plastic bags away from children to avoid suffocation hazards.
Disclaimer: Specifications are subject to change without notice. The manufacturer is not liable for device damage or losses caused by improper wiring, mounting, or uncalibrated conditions.
Designed for ultimate convenience and efficiency, this product supports quick on-site configuration and parameter reading using an infrared (IR) remote control. Once deployed, debugging and maintenance can be easily accomplished even without relying on a smart home platform.
