The CTL-SEN-Mini/7105.F51 is a professional-grade, ultra-compact occupancy sensor leveraging advanced Time-of-Flight (ToF) ranging technology. Unlike traditional sensors, it measures precise distances with millimeter-level accuracy to detect stationary presence and exact positioning within defined zones. Engineered for sophisticated architectural lighting, it integrates the DALI protocol to enable high-precision automation and granular control over connected fixtures. Its miniature form factor (Φ35 mm cutout) ensures a seamless, discreet installation tailored for premium environments.
0.1 to 3.2 m (sensor to target)
| Protocol | DALI |
| BOX Input Voltage | AC 100 to 240 V or DC 12 to 30 V |
| DALI Bus Output | DC 16 V (< 100mA) |
| Max Fixtures | ≤ 25 units |
| BOX Output Voltage | DC 24 V (< 500 mA) |
| Sensor Input Voltage | DC 24 V |
| Power Consumption | 0.5 W (Max) |
| Indicator Light | LED |
| Detection Mode | ToF Time of Flight Sensor |
| Light Source | 940 nm |
| Laser Safety | Class 1 (IEC 60825-1:2014) |
| Update Rate | 15 Hz / 30 Hz |
| Installation Method | Recessed Ceiling Mount |
| Mounting Height | 2.0 to 4.0 m |
| Detection Angle | 11° |
| Detection Coverage | ≤ 0.4 m |
| Detection Range | 0.1 to 3.2 m (sensor to target) |
| Illuminance Monitoring | 0 to 32,000 Lux (Accuracy ±4%) |
| Delay Time | 1 to 3,600 seconds |
| Product Size | Φ43 mm x 25 mm |
| Cutout Size | Φ35 mm |
| Product Weight | 24 g |
| BOX Size | 84 mm x 26 mm x 21 mm |
| BOX Weight | 43 g |
| Cable Assembly | UL2468 22AWG Cable Length: 200 mm |
| Operating Environment | Indoor -20 to 45°C Humidity < 95% RH (Non-condensing) |
| Storage Temperature | -40 to 85°C |
| Protection Level | IP20 |
| Housing Material | PC |
Environmental Requirements: Avoid moving objects, direct light, and reflections. Dark materials reduce sensitivity.Ensure the lens remains free of heavy soiling or scratches, as this may compromise detection accuracy.
Unpacking: Unpack carefully and inspect contents immediately. Dispose of packaging per local regulations.
Electrical Safety: Disconnect power. Use certified cables with circuit protection. Do not touch internal components.
Wiring Safety: Mount at least 30 cm above the floor with 1 meter clearance from walls or obstacles. Ensure an unobstructed view of the detection zone.
Disclaimer: Specifications subject to change without notice. No liability assumed for improper installation.
