The DIN-EGW-F2 is a cost-effective communication gateway specifically designed for the Industrial Internet of Things (IIoT). Its core function is to support bidirectional transparent transmission between RS485 and Ethernet networks using an open communication protocol for seamless integration with mainstream central control systems. The device features two independent RS485 interfaces (connecting controllers and sensors respectively) with support for 120Ω termination resistors. It also integrates one relay output and one wide-voltage (DC 12~30V) DI input to meet switching control and data acquisition needs. For easy deployment and maintenance, the gateway is equipped with 20 sensor status indicators and an MSG error light for intuitive monitoring. It supports DHCP and PC software configuration, with a 10-second long-press RST function for quick factory resets.
| Serial Interface | 2 × RS485, both with switchable 120Ω termination resistors |
| Device Capacity | ≥ 20 sensors |
| Operating Mode | TCP Server |
| Network Interface | 10/100 Mbps Adaptive (RJ45) |
| IP Acquisition | DHCP / Static IP |
| Power Input | DC 12 ~ 30 V |
| Operating Current | ≤ 20 mA |
| Relay Output | Normally Open (NO) / Normally Closed (NC) |
| Digital Input (DI) | DC 12 ~ 30 V |
| RST Button | Long press 10s for factory reset |
| Wiring Specification | < 1.5 mm² |
| Dimensions | 106 mm × 75 mm × 42 mm |
| Net Weight | 116g |
| Configuration Tool | Creatrol Net Finder |
| Operating Temperature | -20 to 45 °C (Indoor) |
| Operating Humidity | < 95% RH (Non-condensing) |
| Storage Temperature | -40 to 85 °C |
| Indicators | 20 Sensor LEDs: Red (Online/Signal); Green (Online/No Signal); Off (No Device). MSG: Red (Device Offline); Green (Controller Connected). PWR: Solid Green (Power On). |
| Enclosure Material | ABS, Flame-retardant PC (UL94 V-0) |
Electrical Safety:
Ensure the power supply is disconnected before wiring.
Strictly follow the wiring diagram and requirements during installation.
All line voltages and main cables must use nationally certified or professionally tested cables.
Product Specifications & Changes:
Product design specifications are subject to change without prior notice. The actual product may differ slightly from the illustrations.
Disclaimer:
Please strictly observe the installation guidelines above. The company assumes no responsibility for any interference or equipment performance issues caused by improper installation. Ensure all installation steps and environmental requirements are properly executed to guarantee optimal equipment performance and accuracy. If you have questions or encounter problems during installation, please contact us for assistance.
